Hops 1
Size: 92.0x178.0 mm (3.62x7.01 "), Stitches: 20060
Size: 102.5x198.3 mm (4.04x7.81 "), Stitches: 22656
Hops 2
Size: 109.0x178.0 mm (4.29x7.01 "), Stitches: 23165
Size: 121.4x198.6 mm (4.78x7.82 "), Stitches: 26178
Formats: .dst, .jef, .pec, .vip, .hus, .pes, .sew, .exp, .dat, xxx, vp3
Consider the main features of machine embroidery on linen fabrics.
Machine embroidery on linen fabric is not expensive, and not a very complicated process. The main thing to take into account some features.
Before hooping the linen fabric, it needs to be properly smoothed. On the wrong side, the required stabilizer is glued. The choice of the stabilizer in this case depends on the design you chose and the density of the fabric. For thin linen fabrics, use a denser stabilizer. For thick, on the contrary, thinner.
Check that you tightened the screw on the embroidery frame. This will ensure sufficient tension of the tissue.
Needle for embroidery on linen fabric can use the usual. Or take #75/11 for better results.
Threads can also be used any. Yet experienced embroiderers do not recommend embroidering on linen with a metallic thread.
Very often, cotton thread is used for embroidery on linen fabric. Its haze is perfectly combined with the fabric texture. True, when embroidering with a cotton thread, pay attention to its fragility. For items with frequent washing and constant wearing, it is not very suitable. Since it is characterized by a high grinding ratio.
Hops borders Machine Embroidery Designs also perfectly fit in the interior of pubs, beer bars, cafes and other institutions.
This design has been tested and reviewed to ensure top quality. Test stitch the design, or portions of it, before stitching it onto your final item, as results may vary depending on fabric and stabilizer combination.
Please don't sell or trade the embroidery file.