Size: 198.3x198.4 mm (7.81x7.81 "), Stitches: 40629
Size: 218.4x218.4 mm (8.60x8.60 "), Stitches: 45711
Size: 238.3x238.3mm (9.38x9.38 "), Stitches: 50983
Size: 257.7x257.7 mm (10.15x10.15 "), Stitches: 56439
Formats: .dst, .jef, .pec, .vip, .hus, .pes, .exp ,. sew, .dat, .vp3, xxx
Size: 297.6x297.6mm (11.72x11.72 ") Stitches: 68496
Size: 348.0x348.0 mm (13.70x13.70 "), Stitches: 83646
Formats: .dst
1. Glue the tear-away stabilizer to the fabric on the wrong side.
2. Hoop the fabric together with the stabilizer.
3. Put it into the embroidery machine.
4. Embroider. When the machine sews the circuit, stop the machine.
5. Cut the excess fabric close to the edge (from the outside).
6. Continue embroidering to the end.
7. Tear off the excess stabilizer.
This design has been tested and reviewed to ensure top quality. Test stitch the design, or portions of it, before stitching it onto your final item, as results may vary depending on fabric and stabilizer combination.
Please don't sell or trade the embroidery file.