Machine Embroidery Designs Zebra prints for quilting is a set of nine designs for hoops 100x100 mm (4x4"). You can embroider many different African-style décor options for your home using it.
Size: 98.2x98.4 mm (3.87x3.87 "), Stitches: 12652
Size: 98.3x98.3 mm (3.87x3.87 "), Stitches: 14010
Size: 98.2x98.3 mm (3.87x3.87 "), Stitches: 13540
Size: 98.2x98.4 mm (3.87x3.87 "), Stitches: 12843
Size: 98.2x98.4 mm (3.87x3.87 "), Stitches: 15693
Size: 98.2x98.4 mm (3.87x3.87 "), Stitches: 13520
Size: 98.2x98.3 mm (3.87x3.87 "), Stitches: 13431
Size: 98.5x98.2 mm (3.88x3.87 "), Stitches: 12732
Size: 98.1x98.5 mm (3.86x3.88 "), Stitches: 12807
Formats: .dst, .jef, .pec, .vip, .hus, .pes, .exp, .sew, .dat, xxx
We suggest you to embroider this pattern on the decorative pillow from the faux fur. Embroidery on faux fur is an interesting project. The rules of embroidery on faux fur are similar to the rules of embroidery on terry towels.
Machine embroidery on faux fur
You should take into account many aspects when making such embroidery projects. Pay attention to such things as fabric density, pile type, design type, method of stabilization and embroidery positioning. In addition, it is necessary to choose the thread type and the suitable needle correctly.
It is recommended to choose not a dense faux fur with a low pile. Since a very dense cloth is hard to hoop. And if the design is also dense, then on such a fabric embroidery will look like a body armor. In addition, for embroidery machine to transfer the design to a three-layer sandwich from a dense fabric, and two stabilizers - this is a big load. In turn, a high-pile fabric will cause the confusing stitches in it.
We have prepared for you an instruction how to embroider Optical illusion Machine Embroidery Design on a faux fur.
Instruction
1. Take the printed design template in full size and the air-erase pen.
2. Put the printout in the place where you will want to embroider. Move the center point. Then run the axes direction lines.
3. Leave the template. Take a tear-away medium stabilizer or self-adhesive Madeira Cotton Fix Tear-away stabilizer.
4. Cut the cloth of the stabilizer more than the size of the hoops.
5. Spray the glue of a temporary fixation and attach it to the back of the fabric in the place where you will have embroidery. To glue a tear-away self-adhesive stabilizer, just remove the protective film.
6. If you are embroidering on the terry towel surface itself, apply a water-soluble stabilizer, for example, Madeira Avalon Plus, on the front side. Hoop this sandwich. If you are embroidering on the edge of the product, topping is not necessary.
7. Place the hoops in the machine.
8. Embroider the design.
9. After embroidery, cut off the excess stabilizer from below.
10. If you have used the top water-soluble stabilizer, remove it by washing the product.
We hope that with this instruction you can easily Optical illusion Machine Embroidery Design on faux fur fabrics.